Product NewCams

Cast Camshaft

Cast Camshaft

The main production process for casting camshafts is ductile iron.

Cams with high requirements for rolling contact and induction hardened protrusions.

Steel Alloy Camshafts

Steel alloy camshaft: (forged or processed from solid materials)

Our excellent materials, quality, and precision mean better durability and performance

Steel Alloy Camshafts

Assembled Camshafts

Assembled Camshafts

By using precision steel pipes and steel camshafts, combined with powder metal, assembled camshafts can be made, which can greatly optimize the performance of the entire valve drive system.

With its modular structure and high adaptability, assembled camshafts are gradually replacing other forms of camshafts.Compared to cast or forged camshafts, combination camshafts can reduce weight by 45%.Input and output components can be assembled through different production processes and materials,depending on the design.

Balance Shaft

A shaft equipped with an eccentric weight and rotating synchronously with the crankshaft,

Utilize the reverse vibration force generated by the eccentric weight block,

Enable the engine to achieve good balance and reduce engine vibration.

Balance Shaft

Drive Shafts

Fuel Pump Drive Shaft

Two Check Valve, one in and one out, increase fuel pressure.Inject a certain amount of fuel into the combustion chamber at the precise time.

In order to place the high-pressure oil pump in a position that meets the length of the high-pressure oil pipe,Or to avoid other front-end components,High pressure oil pumps are usually driven through a drive shaft.

Oil Pump Shafts

When the rotor disk rotates, the rollers are pressed outward by centrifugal force, like a rotating oil seal. The rotor rotates, and the pump works to suck in fuel from the inlet and press it into the fuel system from the outlet.

When the fuel pump is turned off, the check valve at the outlet closes to prevent fuel from flowing back to the tank through the high-pressure fuel pump.

Oil Pump Shafts

Motorcycle Camshaft

Motorcycle Engine Camshaft

The camshaft of a motorcycle is the largest friction component of a motorcycle;

The working characteristics of the camshaft determine that it must have a certain strength and stiffness, a certain toughness, and good wear resistance.

Variable Valve Timing OCV

Engine Variable Valve Timing (VVT) Oil Control Valve-Solenoid Standard

By adjusting the camshaft phase of the engine, the intake volume can be changed with the variation of engine speed,Thus achieving optimal combustion efficiency and improving fuel economy.

Oil Control Valve

Accessory

Accessory

Accessories for various combinations with camshafts:

Signal wheels, gears, sprockets, washers, etc.

Packaging and Transportation

Logistics:

·	Transport products and/or materials from one place to another
·	Transport raw materials from suppliers to your enterprise
·	Relying on reliable transportation
·	Dependent on warehousing and storage
·	Part of a broader supply chain management process